My Account
Shopping Cart 0 item(s)
View Cart
Facebook Google Plus LinkedIn

Yes, we test IGBTs

Posted by Peter Hiscocks on 10/6/2016 to Software
We were asked the other day whether our curve tracer CTR-101 can test IGBT devices.

What's an Insulated Gate Bipolar Tranistor (IGBT)? If you live in a world of small analog signals (that's us), then you probably haven't used an IGBT. But if you work in high power applications such as variable speed drives for induction motors or welding controllers, you've probably used them.

The IGBT is one of those hybrid devices that is 'the best of both worlds'. It combines the high input impedance of the MOSFET with the low saturation voltage of the bipolar transistor.  The IGBT is used almost exclusively as a switching device, so in the ON state, the power dissipation is proportional to the saturation voltage.  Smaller saturation voltage results in less power dissipation and simplified cooling requirements.

We ordered some of the IGBT model IRG4PF50 to test on the curve tracer. The specifications are impressive: 900 volt breakdown voltage, 51 amps current, 200 watts, all for $6 from Digikey.  Even allowing for the limitations of heatsinks and thermal resistance (which always make the actual power less than shown on the spec sheet), this is an impressive device.

The CTR-101 can measure up to 30 volts or so at a test current of 1 ampere: it's intended for small signal devices.  But we can test the behaviour in the small signal region.  This would be useful, for example, if you needed to match one or more units.

The figure shows the results: on the N-MOSFET setting of the curve tracer, we get a family of curves similar to an enhancement mode MOSFET.  There is certainly enough information here to determine the gate threshold voltage and match device characteristics.  So yes, the CTR-101 can measure the characteristics of an IGBT.

A transfer characteristic (drain current vs gate-source voltage) might also  be useful: if you have some interest in that, give us a shout and we'll add that feature to the software.

Peter Hiscocks
October 2016

Share |

 Technical Papers

 The Single Channel Oscilloscope
 Curing Circuit Oscillation
 Testing a Selenium Rectifier
 Yes, we test IGBTs
 Negative Tracking Power Supply

 September 2017
 October 2016
 June 2016
 March 2016
 January 2016
 August 2015
 July 2015
 May 2015
 February 2015
 January 2015
 October 2014
 September 2014
 June 2014
 March 2014
 February 2014
 September 2013
 July 2013
 April 2012
 February 2012
 January 2012
 October 2011
 September 2011
 June 2011
 March 2011
 January 2011
 December 2010
 October 2010
 September 2010
 May 2010
 April 2010
 December 2009
 November 2009
 April 2009
 March 2009
 December 2008
 October 2008
 September 2008
 June 2008
 May 2008
 March 2008
 February 2008
 September 2007
 August 2007
 July 2007
 June 2007
 October 2006
 September 2006
 July 2006
 May 2006
 March 2006