Syscomp
Electronic Design
Limited
Est. 1979

Network Analyzer

Combine your DSO101 Oscilloscope and WGM101 Waveform Generator into a Network Analyzer with FREE software.

The purpose of a network analyzer is to determine the amplitude and phase response or transfer function of some electrical network. For example, a network analyzer is useful in measuring the amplitude response of an audio tone control or audio filter. It is possible to make these types of measurements by hand, using the DSO101 oscilloscope and the WGM101 waveform generator. The network analyzer software does the job automatically, and plots the amplitude and phase response against frequency.

Screenshots

Screenshot #1 - Amplitude and Phase Response of a notch filter tuned to 120 Hz
Screenshot #2 - Amplitude and Phase Response of an audio transformer with no load
Screenshot #3 - Amplitude and Phase Response of the same audio transformer with a 1k load
Screenshot #4 - Amplitude and Phase Response of the same audio transformer with a 100nF load

Disclaimer

Development of the software is ongoing, and its release is intended to encourage users to download the source code and contribute to the project. The software is free and it has been tested under Windows XP and Linux. We are interested to hear about your experience with this software including any bugs you find, or suggestions you may have.

Download

The network analyzer software is licensed under the GPL, that is, you are free to download and modify* the code, which is located under the Open Instrumentation Project on Sourceforge.

*If you do choose to modify the code, please contact us and share your experience and work.

Installation Instructions

[Download Installation .txt File]
This text file describes how to install the network analyzer software and configure it for use on a Windows operating system.

Technical Paper

Users of the network analyzer may be interested in the technical paper "A Software-Based Network Analyzer" which can be found in Application Notes .

home · products · about us · contact

Copyright © 2005-2010
Syscomp Electronic Design Ltd.
All rights reserved.